Home > Products > Monolithic Refractory > Plastic Refractory > Corundum Refractory Plastic
Corundum Refractory Plastic

Corundum refractory plastic as a kind of hot sales refractory materials for furnace application in Rongsheng refractory refractory bricks factory manufacturing with widely used rotary kiln, heating furnace and other industrial kiln lining and large cement kiln mouth, three wind tunnel coal injection pipe and other parts. Plastic refractory corundum have good properties of good plasticity at room temperature, fine expansion at high temperature, high strength after high temperature, good sealing and convenient construction. There are for sale cheap refractory plastic in RongSheng fire bricks company can provide fireproof plastic specification and category as well as competitive price & high grade quality, other specification according to customer requirements, welcome to contact us or email us for free quote or price list.


Corundum Refractory Plastic Definition

1.Corundum refractory plastic is made of wear-resistant refractory raw materials, aggregated with powder or liquid binder, and mixed with some additives. Plastic refractory corundum can be made of plastic with excellent wear resistance at high temperature.
2.In the wear-resistant refractory plastic, Corundum plastic refractory is the same as the aggregate of the refractory castable, but only the binder is different, the wear-resistant refractory plastic binder is raw clay. Plastic refractory corundum has higher mechanical strength and abrasion resistance than high alumina refractory castable and mullite refractory castable.

Corundum Refractory Plastic Characteristic

1.Castable refractory corundum plastic have high strength, stable thermal shock resistance and excellent performance.
2.Corundum plastic refractory has the least wear loss, high strength, arbitrary shape control, strong integrity, simple construction, good construction performance and high-strength ,castables corundum refractory plastic can be used by adding water and stirring on site.
3.Corundum plastic has higher mechanical strength and abrasion resistance than high alumina refractory castable and mullite refractory castable.
4.Fireproof corundum plastic adopts the composite combination method of hydration combination and agglomeration, and has good toughness and thermal shock stability.
5. Refractory corundum plastic have good volume stability and strong resistance to carbon penetration.
6.Refractory corundum plastic has excellent wear resistance, refractory plastic can withstand high-speed, high-concentration catalyst, coke particles and smoke scouring.
7.The construction time with the castable refractory plastic can be adjusted to maintain a long construction time at high temperatures.
The construction of the refractory castable is good plastic, does not bulge, does not crack.

Corundum Refractory Plastic Specification

Item Refractory Plastic
Index Clay Alumina Corundum
Flexural Strength(Mpa)

(110℃*24h)

6.3 5.3 13.2
Refractoriness(℃) 1500 1600 1900
Al2o3(%) 55 70 90

Corundum Refractory Plastic Application

1.Corundum refractory plastic is suitable for circulating chemical bed boiler cyclone, furnace wall lining and coal ash impact and serious parts.
2.Refractory corundum plastic is mainly used in important parts of circulating fluidized bed boilers, such as the top of the cyclone, the returning device (return valve), the combustion zone of the combustion chamber and other parts with more serious wear and erosion.
3.Refractory plastic corundum is suitable for the cyclone cylinder of the circulating fluidized bed boiler, the lining of the furnace wall and the parts with severe impact and wear of coal ash.

Corundum Refractory Plastic of the Plastic Effect

1.Refractory corundum refractory plastics should have good plasticity during production and use.
2.Plastic refractory castable of the plasticity is the property that the mud material is easily deformed without breaking after being stressed, which is expressed by the plasticity index (the percentage of the plastic deformation height after the impact of the sample and the height of the original sample).
3.The plastic refractory index is 20-30%. If wear resistant corundum plastic refractory is less than 20%, plastic refractory is too hard and difficult to apply. If refractory plastic corundum is more than 30%,refractory plastic is too soft, the beating is not real, and the shrinkage after burning is large. The plastic refractory corundum index is suitable for refractory plastic.
4.There are can be kneaded into a dough by hand, and no water is secreted or sticky. The refractory plastic has high temperature strength, good thermal shock resistance and strong peeling resistance, but the construction efficiency is low and the labor intensity is large.

Corundum Refractory Plastic Construction Process

1.The corundum refractory plastic castable of construction is carried out by the method of tapping and compacting. Before the construction, the refractory plastic can be laid at the required part, the blanks should be laid in the wrong seam. After the beating, the joint of the blank should be beaten, and then the hammer or hammer will be used. The entire area was beaten 3 times to ensure the material density.
2.The correct anchoring factor is very important for supporting the sheet-like refractory plastic. Using rigid anchoring nail tips, the anchoring nail tips are spaced about 150mm~250mm. The thickness of the refractory material can be determined according to the design requirements of different the high temp furnace types.
3.After determining the damaged part with the high temp kiln, the edge is trimmed with a tool at a right angle and not sagged by 20 mm, that is, the repaired thickness is not less than 20 mm. After repairing, the refractory plastic corundum can be smoothed over the original refractory material, the trapezoidal connection cannot occur.
4.Clean the repaired parts with the high temp furnace. If the original refractory material has unstable particles, plastic refractory must be removed. There should be no floating dust to ensure that the repaired surface has a solid and clean working surface.
5.The refractory plastic castable can be sliced with a very clean knife, the fresh side is attached to the repaired part, and then the hammer is hammered or hammered tightly. The blank should be laid in a wrong way. After the beating, the blank should be connected. Sewage, no gaps can occur, and after all the repaired surfaces are attached, use a hammer to repeatedly tamper them until the surface of the blank is wet. Pay attention to the edges when beating, do not beat the original refractory material, and finally solidify the entire repair surface into a smooth plane.

Corundum Refractory Plastic Supplier in RS Refractory Castable Factory

Zhengzhou Rongsheng kiln Refractory Company is located in ZhengZhou Henan province,which is one of the main refractory manufacturing bases in china.There is big exporter of refractory material in Henan province .
Main products as follow:
1)Various industrial furnace series refractories
High-alumina brick, anchor brick, clay brick, lightweight insulation brick, high-strength diatomaceous earth brick, low-iron mullite brick, silica brick
2)Heat storage balls for various industrial furnace regenerators
Special corundum heat storage balls, honeycomb, regenerator block, tapping chute brick,Anti-stripping high-alumina bricks for cement industry, alkali-resistant bricks, phosphate bricks, etc.
3)Industrial furnace and power generation boiler industry with various brands of wear-resistant bricks, corundum brick, mullite bricks and other stereotypes.
4)Wear-resistant castables, corundum castables, low-cement high-strength castables, impervious materials, self-flowing materials, plastics, and other unshaped refractories.

Products exported to the United States, India, Japan. South Korea, Pakistan and other countries
Welcome to inquiry , in your inquiry, please provide detailed information you known ,thank you.

Inquiry:

*
*
Please Choose:
*